Description
1. DZQ100/60/22 mobile belt conveyor is used for the excavating process of underground coal mines.
2. This front dump mine skip is worked as one of the transferring equipment between mucking loader and telescopic belt conveyor.
3. It moves forward and backward together with the mucking loader.
4. It transfers coal and waste rock loaded by mucking loader to telescopic belt conveyor.

Application
1. The mobile belt conveyor (DZQ) is used for the excavating process of underground coal mines.
2. It can be used together with scraper, telescopic belt conveyor and other corresponding mine cars.

Model Name Explanation
E.G.: mobile belt conveyor DZQ100/60/22
D: belt
Z: transship
Q: bridge style
100: belt width (1000mm)
60: conveying capacity (600t/h)
22: power (22 kW)

Parameters

Mine Car
Item	Unit	Parameter
Belt Width	mm	800
Belt Speed	m/s	1.6
Overall Length	m	16
Track Gauge	mm	600
Motorized Pulley Power	kW	11.4

Mobile Belt Conveyor
Item	Unit	Parameter
Belt Width	mm	800
Belt Speed	m/s	1.6
Overall Length	m	16.5
Track Gauge	m	12
Motorized Pulley Power	kW	11.4

Note
1. Adjust on time if the belt is off tracking.
2. Repair or replace the carrier roller on time if it can not run smoothly.
3. Check the temperature of the motorized pulley every two hours. If there is anything abnormal, repair it on time.
4. Starting sequence.
(1) Telescopic belt conveyor;
(2) Mobile belt conveyor;
(3) Mucking loader.
5. Stopping sequence.
(1) Mucking Loader;
(2) Stop the mobile belt conveyor only after all the coal materials are transshipped.
6. Starting requirements.
(1) Start the mobile belt conveyor with nothing loaded.
(2) Fast and frequent ON and OFF is forbidden.

Maintenance
1. Belt joint
(1) Regular check if there is any damage.
(2) Cut the damaged parts on time.
(3) Make sure the cutting line is perpendicular to the center line of the conveyor belt.

2. Sludge scraper
(1) Function: it is used to scrape the sludge on the belt.
(2) Position: it should always be in touch with the belt.
(3) Remain certain pressure to effectively scrape sludge.

3. Carrier roller
(1) Regularly check if it runs smoothly.
(2) Replace the one that does not meet requirements.
(3) If it sounds sharp and loud, fasten the belt immediately.

4. Remove all obstructions that may influence the normal functioning of the machine.